Loading the content... Loading depends on your connection speed!
Specially designed to make installation easier. It allows to place a board from 90 cm. to 120 cm., from ground level every 5 cm. and only with a pencil or a punch help to mark wall points where holes will be made later for anchor.
Set supplied in a wooden box with handle for transport.
It is designed only for boards and cork boards with aluminium frame except Ref. 800, 820 and 840. For references 1011, 1012, 1013, 1014 and 1R11, if you wish to install in the supports Ref. 13/130, they must be ordered detailing that they will be used for that purpose. Functional design which allows placing boards and cork boards horizontally or vertically. You can adjust the height very simple and easily, only sliding the chosen unit in the support guides. Set of two supports of 1950 mm. of height, with two bases and all assembling elements included. In order to get an optimum stability, we recommend bases of diameter 350 mm. for boards of 122×150 cm. or lower sizes, and 500 mm. of diameter for boards of higher sizes.
VERY IMPORTANT: This support is certified to arrange boards with a maximum large of 244 cm.
Set of two supports of 1950 mm. height and two bases of 350 mm. diameter.
Set of two supports of 1950 mm. height and two bases of 500 mm. diameter.
Certificated according UNE EN 14434:2010 Standard
C/ PONENT, 25 - 17858 LA CANYA
SANT JOAN LES FONTS (GIRONA) ESPAÑA
TEL. +34 972 29 05 00 - Fax: +34 972 29 31 11 - firstname.lastname@example.org